Model Trimmer
。Connect one end of the water tube to the nozzle of the wet model trimmer and the other end to the tap, open the valve
。Connect the waste-disposal tube to the unit
。 Connect the power cord, and switch on the power switch (O=off, l=on)
。When braking, it is normal to hear clicking before the sand tablet stops. If the sand tablet makes unusually loud noises, remove it, and use the included hex-wrench to adjust the screw on the back cover (18)
。To check if you need to replace the abrasive disk, rotate the disk by hand and estimate: if the platform jumps more than 2mm, change the disk. After replacing the disk, make sure to tighten the ring on the platform 8 (closest to the outside of the sand tablet)
Specfication
。Voltage: 110V/60Hz±10%
。Power: 500W Rotational Speed: 2800 rpm
。Dimensions: 44×35×35cm Weight of the dental trimmer: 20kg
Return & Refund Policy
I’m a Return and Refund policy. I’m a great place to let your customers know what to do in case they are dissatisfied with their purchase. Having a straightforward refund or exchange policy is a great way to build trust and reassure your customers that they can buy with confidence.
Shipping Info
I'm a shipping policy. I'm a great place to add more information about your shipping methods, packaging and cost. Providing straightforward information about your shipping policy is a great way to build trust and reassure your customers that they can buy from you with confidence.