Model Trimmer

。Connect one end of the water tube to the nozzle of the wet model trimmer and the other end to the tap, open the valve
 
。Connect the waste-disposal tube to the unit
 
。 Connect the power cord, and switch on the power switch (O=off, l=on)
 
。When braking, it is normal to hear clicking before the sand tablet stops. If the sand tablet makes unusually loud noises, remove it, and use the included hex-wrench to adjust the screw on the back cover (18)
 
。To check if you need to replace the abrasive disk, rotate the disk by hand and estimate: if the platform jumps more than 2mm, change the disk. After replacing the disk, make sure to tighten the ring on the platform 8 (closest to the outside of the sand tablet)